Special support- Super horizontal axis micro 1.5kw

Special support- Super horizontal axis micro 1.5kw wind turbine generator1. Application A wind turbine, which is installed on top of a tall tower, collects kinetic energy from the wind and converts it to electricity that is compatible with a home's electrical system.Small wind systems for remote applications operate somewhat differently,and it needs batteries.2. Structure and Main performanceEXMORK turbines are made of strong cast steel that makes them durable.EXMORK turbines can withstand harsh environments like strong winds and cold weather.Using high performance NdFeB permanent magnet, the alternator is high efficient and compact. The unique electro-magnet design makes the bonding force and cut-in speed very low.3. Main technical performances Model: ZH1.5KW Rated Power: 1500 Watts Maximum Power: 1800 Watts Type: 3 Blade Upwind Rotor Diameter: 3.2 m (10.4ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Overspeed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 24VDC,48 VDC Nominal 4. Application principles 4.1 The wind turbine should be installed in an open and flat area without barriers nearby. 4.2 Off-grid wind turbine generating electric power is charged to the batteries group. When there is no wind, it consumes the electricity from the battery group. Therefore, after discharging, the batteries should be recharged timely, especially for lead-acid batteries. During the working, over discharging, over charging or after over discharging, the batteries cannot be recharged timely, the working life of the batteries will be reduced in above conditions. So, the users should regulate the consuming capacity of the electricity according to local wind condition and the electricity capacity generated by the wind generator. 4.3 After passing full wave bridge rectification, the 3-phase AC electricity generated by wind generator is output with DC power, usually are DC24V, 36V, 48V, 120V. The voltage of the battery group should be equal to the DC voltage of the wind generator (after rectification). 4.4 The input DC voltage of the matched inverter should be equal with working voltage of the wind generator (after rectification).